Pumps

Archive for the ‘Gould Pumps’ Category

i have a gould jet pump and a bladder tank and a well,my pressure dropped to 0- 2 nights ago and the pressure switch which normally clicks on at 30 lbs never did,during the day after i manualy hold up on the switch it hold pressure all day,last night the same thing,do you think its my sucktion line check valve leaking,or my pressure switch?

It is your pressure switch..if it was a leak your pump would be pumping constantly..the points in the pressure switch have welded shut or open… It is a bad switch

i have a drilled well 8 inch diameter casing, it is 35 feet deep. what is the maximum lift capacity of my shallow well pump, it is a goulds 1/2 hp jet pump

a 1/2 hp jet pump will lift water 50 ft as long as you have two pipes in the well with the injector assembly within one foot of the bottom..with one pipe and the injector at the pump, no matter what hp the pump will only lift water 35 feet…you shouldnt have no problems with this pump in either case as goulds pumps are a quality pump…

i have a shallow well pump(goulds 1/2 hp) i have replaced all my water lines in the house with cpvc 1/2". all faucets, toilets etc have been replaced recently. i do not have enough pressure in my up stairs shower/tub. my pump pressure is set at 45 lbs right now. i am wondering what the safest high pressure i can set my pump to.

40 psi on and 60 psi off. That will work fine. You can go higher but I wouldn’t recommend it for your pumps sake.

Really need more info.. Could be a sewage pump for a basement drain or toilet. Goulds also builds deep well pumps and swimming pool pumps.. The ones I have used in deep water wells were very dependable. Ask your realator, they should know… One thing to think about is that sometimes these things in the basement really stink though. so check the installation if it is the sewage type pump.

Also it could also be the sump pump for the basement or crawl space water removal….. I know it did not answer y our question, but tried to cover multiple types.. Did not find that exact number on a Google search. But you might try this site http://www.ds-watersystems.com/submersible-well-pump-wire.html

My Goulds “Balance Flow” water Pump working pump water from a metal pal in my shop

Duration : 0:1:0

Read the rest of this entry »

Technorati Tags: Balance Flow, Goulds, pump, water pump

Conjunto del eje instalado

Duration : 0:0:24

Read the rest of this entry »

Technorati Tags: 3410, BOMBA

Inspección de carcasa y eje de Bomba, con todos sus componentes

Duration : 0:0:59

Read the rest of this entry »

Technorati Tags: 3410, BOMBA, gouds, pumps

wacp6http://gdata.youtube.com/feeds/api/users/wacp6EducationBomba, Goulds, Pumps, 3410Inspección Bomba Goulds Pumps 3410 (2) Suministros

Duration : 0:3:13

Read the rest of this entry »

Technorati Tags: 3410, BOMBA, Goulds, pumps

wacp6http://gdata.youtube.com/feeds/api/users/wacp6EducationVTS, 01Inspección Bomba Goulds Pumps 3410 (1) (Suministros)

Duration : 0:2:37

Read the rest of this entry »

Technorati Tags: 01, VTS

Mantenimiento de bomba 3196 MTX, realizado por SUMINISTROS INGENIERIA Y MANTENIMIENTO INDUSTRIAL.
Jefe de Mantenimiento (Ing. Walter Arellano Pozo)

Duration : 0:5:12

Read the rest of this entry »

Technorati Tags: 3196MTX, BOMBA, Goulds, MANTENIMIENTO, pumps